To Close from Vent Position

To close the power sunroof from the vent position, turn the ignition ON, with the engine OFF. Press and hold the sunroof switch (rearward portion). This will apply the sunroof switch low reference to the sunroof switch open signal circuit (5 volt reference) input to drop to 0 volts. As long as the sunroof module sees a constant input request from the sunroof switch open signal circuit (0 volts), the module will continue to lower the rear of the glass (downward) to the closed position. The sunroof glass will stop (soft stop) at the closed position based on the inputs from the limit switches. The sunshade will have to be manually slid closed.