LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Wheel Opening Flare Replacement - Rear (All Except Xtreme) >> Removal Procedure

Removal Procedure

  1. Remove the wheel house panel access plugs.
  2. Remove the nuts that retain the panel to the flare.
  3. Remove the screws that retain the flare to the panel.
  4. Remove the flare from the panel.
    Fig 1: Removing Flare To Panel Retaining Screws
    G01477374Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals