LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement -Body Side Roof Drip >> Removal Procedure

Removal Procedure

  1. Pull the roof drip weatherstrip from the door opening frame.
  2. Remove any remaining weatherstrip material or adhesive.
    Fig 1: Pulling Roof Drip Weatherstrip From Door Opening Frame
    G01477394Courtesy of GENERAL MOTORS CORP.