LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Installation Procedure

Installation Procedure

  1. Install the knee bolster trim panel to the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws that retain the knee bolster trim panel to the instrument panel.

    Tighten 

    • Tighten the TORX screws to 9 N.m (80 lb in).
    • Tighten the hex head screws to 1.9 N.m (17 lb in).

  3. Install the screw that retains the courtesy lamp to the knee bolster. Refer to COURTESY LAMP REPLACEMENT -- INSTRUMENT PANEL (LOWER) in Lighting Systems.
  4. Install the park brake release cable to the park brake lever. Refer to PARK BRAKE CABLE -- FRONT in Park Brake.
  5. Install the lower instrument panel sound insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) LOWER .
  6. Install the left-side instrument panel sound insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT .
    Fig 1: Installing Knee Bolster Trim Panel To Instrument Panel Retaining Screws
    G01476623Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals