LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bracket Replacement - Steering Column >> Removal Procedure

Removal Procedure

Important:  The steering column support is not serviceable.

  1. Remove the instrument panel. Refer to INSTRUMENT PANEL (I/P) CARRIER REPLACEMENT .
  2. Remove the brake switch. Refer to STOPLIGHT SWITCH in Hydraulic Brakes.
  3. Remove the brake booster pushrod from the brake pedal. Refer to VACUUM BRAKE BOOSTER in Hydraulic Brakes.
  4. Remove the clutch master cylinder pushrod from the clutch pedal, if equipped. Refer to CLUTCH PEDAL REPLACEMENT in Clutch.
  5. Remove the following steering column support fasteners
    • The 4 flange nuts
    • The 2 bolts
  6. Remove the brake pedal from the steering column support. Refer to BRAKE PEDAL in Hydraulic Brakes.
    Fig 1: Steering Column Support Bracket Fasteners
    G01476634Courtesy of GENERAL MOTORS CORP.

scientia non olet · About LEMON Manuals