LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Stoplight Switch >> Installation

Stoplight Switch: Installation

  1. Install the electrical connector on the stoplight switch (1). See Fig 1 .
  2. Position the stoplight switch (1) on the pushrod (2) and install on the brake pedal pin. See Fig 1 .
  3. Install the pushrod retainer to the brake pedal pin. The retainer will snap into place.
  4. Install the left sound insulator.
Fig 1: Identifying Stoplight Switch Components
G00083431Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals