LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Disc Brake Backing Plate >> Installation

Rear Disc Brake Backing Plate: Installation

  1. Install the backing plate to the rear axle housing flange.
  2. Install the backing plate nuts. Tighten the backing plate bolts. See TORQUE SPECIFICATIONS  .
  3. Install the rear drive axle. See appropriate REAR DRIVE AXLE article in DRIVELINE/AXLES.
  4. Install the park brake shoe. See PARK BRAKE SHOE  .
  5. Install the rear brake rotor. See BRAKE ROTORS  .
  6. Install the brake caliper and bracket assembly. See BRAKE CALIPER BRACKETS  .
  7. Install the park brake cable to the rear brake caliper. See PARK BRAKE CABLE  .
  8. Adjust the park brake shoe. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTIONS.
  9. Install the tire and wheel assembly. Tighten to specification. See TORQUE SPECIFICATIONS  . Lower the vehicle.
scientia non olet · About LEMON Manuals