LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Hoses >> Removal (Front)

Removal (Front)

  1. Remove the brake hose retaining bolt from the frame.
  2. Install a rubber cap or plug on the brake pipe fitting.
  3. Remove the brake hose bolt from the brake caliper assembly.
  4. Remove the brake hose from the vehicle.
  5. Remove and discard the copper gaskets.
scientia non olet · About LEMON Manuals