LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT   . 
  2. Remove the knee bolster trim panel. Refer to TRIM PANEL REPLACEMENT - KNEE BOLSTER   . 
  3. Remove the 4 knee bolster retaining nuts.
  4. Remove the knee bolster from the steering column support bracket.
    Fig 1: Removing Knee Bolster From Steering Column Support Bracket
    G01640871Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals