LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left closeout insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT   . 
  2. Remove the knee bolster trim panel. Refer to TRIM PANEL REPLACEMENT - KNEE BOLSTER   . 
  3. Remove the instrument panel cluster (IPC) bezel, Chevrolet only. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER (CHEVROLET)   or BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER (GMC/OLDSMOBILE)   . 
    Fig 1: Removing Instrument Panel Cluster
    G01640890Courtesy of GENERAL MOTORS CORP.
  4. Remove the instrument panel (I/P) accessory trim plate, GMC or Oldsmobile only. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (CHEVROLET)   or TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (OLDSMOBILE)   . 
  5. Remove the screws retaining the IPC to the I/P.
  6. Partially remove the IPC from the I/P in order to gain access to the electrical connector.
  7. Disconnect the electrical connector from the IPC.
  8. Remove the IPC from the I/P.
scientia non olet · About LEMON Manuals