LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Console Shift Lever Bezel Replacement (Oldsmobile) >> Installation Procedure

Installation Procedure

  1. Install the trim plate from the floor console.
  2. Install the floor console trim plate by seating the retaining clips.
  3. Install the floor shift control boot to the console.
  4. Position the shift lever in the PARK position.
  5. Remove the blocks from the vehicle.
    Fig 1: Installing Floor Console Trim Plate & Clips
    G01640936Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals