LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower (GMC/Chevrolet) >> Installation Procedure

Installation Procedure

  1. Install the closeout panel to the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 4 screws that retain the closeout panel to the IP.

    Tighten 

    Tighten the screws to 1.9 N.m (17 lb in).

  3. Install the floor console. Refer to CONSOLE REPLACEMENT  
    Fig 1: Installing Closeout Panel To Vehicle (GMC/Chevrolet)
    G01640868Courtesy of GENERAL MOTORS CORP.