LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bezel Replacement - Instrument Panel (I/P) Cluster (GMC/Oldsmobile) >> Installation Procedure

Installation Procedure

  1. Install the bezel to the instrument panel.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws that retain the bezel to the instrument panel.

    Tighten 

    Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the knee bolster trim panel. Refer to TRIM PANEL REPLACEMENT - KNEE BOLSTER   . 
  4. Install the left closeout/insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT   . 
    Fig 1: Installing Bezel To Instrument Panel (GMC/Oldsmobile)
    G01640882Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals