LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Removal Procedure

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT   . 
  2. Remove the 4 trim panel retaining screws.
  3. Release the clips that retain the trim panel to the IP.
  4. Remove the trim panel from the IP.
    Fig 1: Removing Trim Panel & Screws From Instrument Panel (Knee Bolster)
    G01640869Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals