LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Removal Procedure

Removal Procedure

  1. Remove the 2 screws that retain the insulator panel to the instrument panel (IP).
  2. Partially remove the insulator panel.
  3. Remove the electrical connector retaining clip from the back side of the insulator panel if equipped.
  4. Remove the insulator panel from the vehicle.
    Fig 1: Removing Insulator Panel From Vehicle
    G01640860Courtesy of GENERAL MOTORS CORP.