LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Bracket Replacement - Console Floor >> Removal Procedure

Removal Procedure

  1. Block the wheels to prevent the vehicle from moving.
  2. Remove the floor shift control knob.
  3. Remove the center console. CONSOLE REPLACEMENT  
  4. Disconnect the automatic transmission range selector cable.
    5. Fig 1: Removing Console Floor Bracket From Vehicle
    G01640939Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the automatic transmission shift interlock solenoid.
  6. Disconnect the electrical connector from the park brake.
  7. Remove the console bracket from the vehicle, by removing the retaining nuts (1) from the center instrument panel (IP) bracket.
  8. Remove the forward retaining screw, if equipped.
  9. Remove the remaining fasteners from the console bracket.
  10. Remove the console bracket from the vehicle.
  11. Remove the floor shift control.
scientia non olet · About LEMON Manuals