Radio Displays CLN or CLEAN

Step	Action	Yes	No
Schematic Reference: Radio/Audio System Schematics
1	Did you review the Radio/Audio System Description and Operation and perform the necessary inspections?	Go to Step 2	Go to Radio/Audio System Description and Operation
2	Turn ON the ignition, with the engine OFF. Turn ON the radio. Does the radio operate normally?	Go to TESTING FOR INTERMITTENT AND POOR CONNECTIONS	Go to Step 3
3	Clean the tape head path usingJ 39916-A See Special Tools and Equipment . Reset the display by simultaneously depressing the Eject button on the Remote Cassette and the Recall button on the CD player for 5 seconds. Does the radio display CLN or CLEAN?	Go to Step 4	Go to Step 5
4	Replace the radio. Refer to Radio Replacement . Did you complete the replacement?	Go to Step 5	-
5	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 3