LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Power Sun Roof >> Repair Instructions >> Luggage Carrier Slats Replacement >> Removal Procedure

Removal Procedure

  1. Mark the location of the luggage carrier slats on the roof with masking tape.
    2. Fig 1: View Of Luggage Carrier Slats
    GM343997Courtesy of GENERAL MOTORS CORP.
  2. Use tape to protect the mounting surface during removal.
  3. To remove the luggage carrier slats, heat the slats using J 25070  . Apply heat in a circular motion for 30 seconds.
    4. NOTE: Use a plastic, flat-bladed tool to prevent paint damage when removing an emblem/name plate.
  4. Use a plastic, flat-bladed tool to lift or remove the slats from the vehicle.
  5. Remove the luggage carrier slats from the vehicle.
  6. When replacing the slats, remove all of the adhesive using a 3M™ Scotch Brite molding adhesive remover disk, 3M™ P/N 07501 or equivalent.
scientia non olet · About LEMON Manuals