Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the 2 inboard fasteners from the luggage carrier base covers.
- Remove the base covers.
- Remove the fasteners from the front bases.
Courtesy of GENERAL MOTORS CORP.
- Remove the fasteners (1) from each side of the rear base.
- Remove the roller bar/rear cross rail assembly (3) from the vehicle.
- Remove the fasteners (4) from the side rail/rear base.
Courtesy of GENERAL MOTORS CORP.
- With an assistant, pull gently back on the carrier (1) in order to release the carrier from the supports.
- With an assistant, lift the carrier assembly up and off the vehicle.
Courtesy of GENERAL MOTORS CORP.
- Remove the fasteners from the center supports.
- Remove the center supports with pads from the vehicle.
Courtesy of GENERAL MOTORS CORP.
- Remove the rear base fasteners (2) from the vehicle.
- Remove the rear bases with pads from the vehicle.