Mirrors - Automatic Day-Night Mirror Displays OC
Mirrors - Automatic Day-Night Mirror Displays OC
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Inside Rearview Mirror Schematics | |||
| 1 | Did you review the temperature display operation of the inside rearview mirror and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Stationary Windows |
| 2 |
|
Go to TESTING FOR INTERMITTENT AND POOR CONNECTIONS | Go to Step 3 |
| 3 |
|
Go to Step 4 | Go to Step 5 |
| 4 |
|
Go to Step 7 | Go to Step 6 |
| 5 | Test the signal circuit of the ambient air temperature sensor for an open or for a short to battery positive voltage. Refer to CIRCUIT TESTING
and WIRING REPAIRS
. Did you find and correct the condition? |
Go to Step 11 | Go to Step 8 |
| 6 | Test the low reference circuit of the ambient air temperature sensor for an open or for a high resistance. Refer to CIRCUIT TESTING
and WIRING REPAIRS
. Did you find and correct the condition? |
Go to Step 11 | Go to Step 8 |
| 7 | Inspect for a poor connection at the harness connector of the ambient air temperature sensor. Refer to TESTING FOR INTERMITTENT AND POOR CONNECTIONS
and to CONNECTOR REPAIRS
. Did you find and correct the condition? |
Go to Step 11 | Go to Step 9 |
| 8 | Inspect for a poor connection at the harness connector of the inside rearview mirror. Refer to TESTING FOR INTERMITTENT AND POOR CONNECTIONS
and to CONNECTOR REPAIRS
. Did you find and correct the condition? |
Go to Step 11 | Go to Step 10 |
| 9 | Replace the ambient air temperature sensor. Refer to Ambient Air Temperature Sensor Replacement . Did you complete the replacement? |
Go to Step 11 | - |
| 10 |
IMPORTANT:
Perform Compass Calibration and Variance Procedure for the inside rearview mirror with compass. Replace the inside rearview mirror. Refer to Rearview Mirror Replacement .Did you complete the replacement? |
Go to Step 11 | - |
| 11 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |