LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Replacement (Non-Luxury) >> Removal Procedure

Removal Procedure

  1. Remove the IP cluster trim plate bezel. Refer to Bezel Replacement - IP Cluster .
    2. Fig 1: Removing Trim Plate Bezel (Non-Luxury)
    G01697227Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster screws.
  3. Unsnap the top of the knee bolster from the IP assembly.
    4. Fig 2: Locating Knee Bolster Screws (Non-Luxury)
    G01697228Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals