LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Replacement (Luxury) >> Removal Procedure

Removal Procedure

  1. Remove the IP cluster trim plate bezel. Refer to Bezel Replacement - IP Cluster .
  2. Move the IP extension rearwards. Refer to IP Extension Replacement (Luxury)  or IP Extension Replacement (Non-Luxury)  .
    3. Fig 1: Removing Trim Plate Bezel (Luxury)
    G01697230Courtesy of GENERAL MOTORS CORP.
  3. Remove the knee bolster screws.
  4. Unsnap the top of the knee bolster from the IP assembly
    5. Fig 2: Locating Knee Bolster Screws (Luxury)
    G01697231Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals