LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Replacement (Luxury) >> Installation Procedure

Installation Procedure

  1. Snap the top of the knee bolster into the IP assembly.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the knee bolster screws. Tighten the screws to 2 N.m (18 lbs in).
  3. Install the IP cluster trim plate bezel. Refer to Bezel Replacement - IP Cluster .
  4. Install the IP extension to the IP. Refer to IP Extension Replacement (Luxury)  or IP Extension Replacement (Non-Luxury)  .
    5. Fig 1: Installing Knee Bolster Screws (Luxury)
    G01697232Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals