Removal Procedure

Remove the floor console upper bezel by firmly pulling on the corners.

Fig 1: Removing Floor Console Upper Bezel
Courtesy of GENERAL MOTORS CORP.

NOTE: The ashtray lid and cupholder lid must be in the open position.
Open the ashtray lid (1) and cupholder lid (2)
Open the center console storage lid.
Gently pull on the front part of the bezel to release the retainers.
Pull out the bezel partially to gain access to the wire connectors.
Disconnect the wire connectors.
Remove the lower bezel from the center console.

Fig 2: Locating Ashtray & Cupholder Lids

G01697334

Courtesy of GENERAL MOTORS CORP.