LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Fascia Replacement - Rear Bumper (Utility) >> Removal Procedure

Removal Procedure

    Fig 1: Removing Rear Bumper Fascia (Utility)
    GM316187Courtesy of GENERAL MOTORS CORP.
  1. Remove the top fascia retainers.
  2. Disconnect the license plate lamp harness.
  3. Raise and support the vehicle with suitable safety stands. Refer to LIFTING & JACKING THE VEHICLE .
  4. Remove the Spare Tire Wheel Hoist Guide Retaining Clips. Refer to TIRE HOIST AND SHAFT REPLACEMENT .
  5. Remove the push-pin retainers from the underside of the fascia.
  6. Remove the fascia from the impact bar.
scientia non olet · About LEMON Manuals