LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Fascia Replacement - Rear Bumper (Escalade EXT) >> Installation Procedure

Installation Procedure

    Fig 1: Installing Rear Bumper Fascia (Escalade EXT)
    GM820663Courtesy of GENERAL MOTORS CORP.
  1. Install the rear fascia to the bumper bar.
  2. Install the rear object sensors. Refer to REAR OBJECT SENSOR REPLACEMENT .
  3. Install the center fascia step pad. Refer to Step Pad Replacement - Center Rear Bumper  .
  4. Install the top fascia step pads. Refer to Step Pad Replacement - Top Rear Bumper  .
  5. Install the spare tire wheel hoist guide and retaining clip. Refer to TIRE HOIST AND SHAFT REPLACEMENT .
  6. Install the rear license plate and attaching hardware from the rear bumper.
scientia non olet · About LEMON Manuals