LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Fascia Replacement - Rear Bumper (Avalanche) >> Installation Procedure

Installation Procedure

    Fig 1: Installing Rear Bumper Fascia (Avalanche)
    GM820663Courtesy of GENERAL MOTORS CORP.
  1. Install the fascia onto the impact bar.
  2. Install the retainers into the underside of the fascia.
  3. Install the Spare Wheel Hoist Guide Shaft from vehicle. Refer to TIRE HOIST AND SHAFT REPLACEMENT .
  4. Install the Center Step Pad. Refer to Step Pad Replacement - Center Rear Bumper  .
  5. Install the Left/Right Side Step pads. Refer to Step Pad Replacement - Top Rear Bumper  .
  6. Install the Left/Right Side Step pads. Refer to Step Pad Replacement - Side Rear Bumper  .
scientia non olet · About LEMON Manuals