LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Brace Replacement - Front Bumper (Avalanche) >> Installation Procedure

Installation Procedure

    Fig 1: Installing Front Bumper Brace (Avalanche)
    GM741575Courtesy of GENERAL MOTORS CORP.
  1. Install the brace (1) to the vehicle.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the 2 bolts that retain the brace to the fascia and the outboard brace plate.

    Tighten: 

    • Tighten the front bumper fascia brace bolt (2) to 15 N.m (11 lb ft).
    • Tighten the front bumper outboard brace plate bolt (3) to 9 N.m (80 lb in).

scientia non olet · About LEMON Manuals