LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Lock Striker Replacement - Endgate (Tahoe/Yukon) >> Installation Procedure

Installation Procedure

    Fig 1: Installing Endgate Lock Striker (Tahoe/Yukon)
    GM744Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  1. Install the striker.

    Tighten:  Tighten the bolts to 22 N.m (16 lb ft).

  2. Install the trim panel. Refer to Trim Panel Replacement - Liftgate .
scientia non olet · About LEMON Manuals