LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Garnish Molding Replacement - Liftgate >> Removal Procedure

Removal Procedure

    Fig 1: Liftgate Garnish Molding
    GM784739Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate window.
  2. Remove the push pin retainers from the garnish molding.
  3. Pry gently with a thin-bladed tool in order to release the retaining clips.
  4. Remove the garnish molding.
scientia non olet · About LEMON Manuals