LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Window Motors & Regulators >> Stationary Window System >> Repair Instructions >> Stationary Window Reveal Molding Repair >> Removal Procedure

Removal Procedure

    Fig 1: View Of Window Reveal Molding
    GM301108Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to GLASS & SHEET METAL HANDLING CAUTION .
    IMPORTANT: The window reveal molding fills the cavity between the body and window. If the reveal molding is stretched or damaged, it cannot be reused and it must be replaced.
  1. Lift up on the loose area of the reveal molding.
  2. Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free cloth.
scientia non olet · About LEMON Manuals