LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Shroud Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Shroud & Screws
    GM755486Courtesy of GENERAL MOTORS CORP.
  1. Install the steering wheel rear trim cover.
  2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the steering wheel rear trim cover mounting screws.

    Tighten:  Tighten the steering wheel shround mounting screws to 2 N.m (20 lb in).

  4. Install the steering wheel. Refer to Steering Wheel Replacement .