LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Column Seal Replacement - On Vehicle >> Installation Procedure

Installation Procedure

    Fig 1: Steering Column Seal & Nuts
    GM362507Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the seal to the vehicle.
  2. Install the nuts to the studs.

    Tighten:  Tighten the nuts to 3 N.m (25 lb in).

  3. Install the intermediate shaft. Refer to Intermediate Steering Shaft Replacement - Lower .