Automatic Transmission Shift Lock Control - Disassemble - Off Vehicle (Column Shift)
- Disable the inflatable restraint steering wheel module. Refer to DISABLING SYSTEM in SIR.
- Put the shift lever clevis into the neutral position.
- Use a small screwdriver to pry the automatic transmission shift lock control away from the steering column jacket assembly and the cable shift cam assembly.
CAUTION:
Refer to SIR CAUTION
in Cautions and Notices.
IMPORTANT:
The abrasion sleeve located on the steering column wire harness assembly must be reinstalled. Make note of what connector is coming out of the abrasion sleeve for installation purposes.