LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Power Seat System >> Repair Instructions >> Seat Cushion Frame Replacement - Rear (60/40 Split - 50/50 Split) >> Installation Procedure

Installation Procedure

    Fig 1: Installing Seat Cushion Frame
    GM276326Courtesy of GENERAL MOTORS CORP.
  1. Install the seat cushion frame (5).
    2. Fig 2: Installing Seat Cushion Trim Cover & Pad
    GM833284Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts to the hinge assembly, if removed.

    Tighten:  Tighten to 7 N.m (61 lb in).

  3. Install the seat cushion trim cover (8) and the pad (7). Refer to Seat Cushion Cover and Pad Replacement - Rear (60/40 - 50/50 Split)  or Seat Cushion Cover and Pad Replacement - Rear (Bench) .
scientia non olet · About LEMON Manuals