LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Power Seat System >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear (Bench) >> Removal Procedure

Removal Procedure

  1. Remove the rear seat from the vehicle. Refer to Seat Replacement - Rear Bench .
  2. Remove the J-Clips from the back of the seat.
  3. Remove the bolts (2) from the grab handle (1).
    Fig 1: Removing Bolts From Grab Handle
    GM841638Courtesy of GENERAL MOTORS CORP.
    4. Fig 2: Removing Support Rod
    GM841644Courtesy of GENERAL MOTORS CORP.
  4. Remove the support rod (1) from the bottom of the seat.
    5. Fig 3: Loosening Bolts On Roller Assembly
    GM841650Courtesy of GENERAL MOTORS CORP.
  5. Loosen the bolts (1) on the roller assembly (2) but do not remove.
  6. Remove the seat cushion cover and pad from the seat frame.
scientia non olet · About LEMON Manuals