LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Power Seat System >> Repair Instructions >> Seat Back Frame Replacement - Rear (60/40 - 50/50 Split) >> Removal Procedure

Removal Procedure

  1. Remove the seat from the vehicle. Refer to Seat Replacement - Rear (60/40 Split)  or Seat Replacement - Rear (50/50 Split 2nd Rear) .
    Fig 1: Rear Seat Back Frame (60/40 - 50/50 Split)
    GM276335Courtesy of GENERAL MOTORS CORP.
  2. Remove the armrest, if equipped. Refer to Armrest Replacement - Rear Seat (60/40 - 50/50 Split)  or Armrest Replacement - Rear Seat (Bucket) .
  3. Partially remove the seat-back cover in order to gain access to the retaining bolts. Refer to Seat Back Cover and Pad Replacement - Rear (60/40 - 50/50 Split)  or Seat Back Cover and Pad Replacement - Rear (Bench) .
  4. Remove the bolts from the seat-back frame.
  5. Remove the seat-back frame (4) from the seat back cushion frame.
scientia non olet · About LEMON Manuals