LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Power Seat System >> Repair Instructions >> Armrest Replacement - Rear Seat (Bucket) >> Removal Procedure

Removal Procedure

  1. Separate the J-clip at the bottom of the seat using a flat bladed tool.
  2. Remove the 2 push pins at the bottom retaining the seat back cover to the card board.
  3. From the back of the front seat, disconnect the heating element wire connector, if equipped.
    Fig 1: Rear Seat Armrest (Bucket)
    GM749102Courtesy of GENERAL MOTORS CORP.
  4. Role up the seat cover up to the bottom of the arm rest.
  5. Recline the seat.
  6. From the front of the seat move the seat cushion away from the seat frame to gain access to the arm rest clip.
  7. Remove the rubber band from the clip.
  8. Remove the clip from the seat frame.
  9. Remove the arm rest by pulling outwards.
scientia non olet · About LEMON Manuals