LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Power Seat System >> Repair Instructions >> Armrest Replacement - Rear Seat (60/40 - 50/50 Split) >> Installation Procedure

Installation Procedure

    Fig 1: Rear Seat Armrest (60/40 - 50/50 Split)
    GM276555Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat armrest to the pivot point on the rear seat.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the armrest bolts (6).

    Tighten:  Tighten the bolts to 9 N.m (80 lb ft).

  3. Install the armrest trim cover (7) and screws (8).
  4. Fold the right rear seat back into the upright position.
scientia non olet · About LEMON Manuals