LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems >> Repair Instructions >> Park/Turn Signal Lamp Replacement (Except Avalanche) >> Removal Procedure

Removal Procedure

  1. Ensure the headlamp switch is in the OFF position.
  2. Remove the headlamp. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Except Avalanche)  or Headlamp Assembly or Headlamp Bulb Replacement (Avalanche)  or Headlamp Assembly or Headlamp Bulb Replacement (Escalade) .
  3. Fig 1: Park/Turn Signal Lamp Assembly
    G01696779Courtesy of GENERAL MOTORS CORP.
  4. Remove the park/turn signal lamp assembly by pushing on the inboard retainer clip.
  5. Disconnect the electrical connector from the assembly.