LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim >> Repair Instructions >> Trim Panel Replacement - Rear Quarter - Right (Utility) >> Removal Procedure

Removal Procedure

  1. Remove the rear seat. Refer to SEAT REPLACEMENT - REAR BENCH .
  2. Remove the Third Pillar trim panel. Refer to Trim Replacement - Third Pillar (Tahoe/Yukon/Escalade/Suburban)  or Trim Replacement - Third Pillar (Avalanche/Escalade EXT)  .
  3. Remove the garnish molding. Refer to Garnish Molding Replacement - Rear Corner  .
  4. Remove the door sill plate. Refer to Door Sill Plate Replacement - Liftgate  .
  5. Remove the quarter panel trim screws.
  6. Fig 1: Right Rear Quarter Trim Panel (Utility)
    GM276495Courtesy of GENERAL MOTORS CORP.
  7. Remove the quarter panel trim from the vehicle.

    Lift the quarter panel to release the quarter panel from the vehicle.