Removal Procedure
- Lower the front section of the headliner and suitably support. Refer to Headliner Replacement .
- Disconnect the electrical connector.
- Remove the rear corner moldings. Refer to Garnish Molding Replacement - Rear Corner .
- Remove the rear upper trim molding. Refer to Garnish Molding Replacement - Rear Upper (Tahoe/Yukon/Escalade/Suburban) or Garnish Molding Replacement - Rear Upper (Avalanche/Escalade EXT) .
- Remove the rear coat hook.
- Carefully release the headliner from the roof support Velcro(R) retainers.
- Remove the headliner from the vehicle.