LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Trim >> Repair Instructions >> Carpet Replacement (Avalanche/Escalade EXT) >> Removal Procedure

Removal Procedure

  1. Remove the front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET .
  2. Remove the rear seats. Refer to SEAT REPLACEMENT - REAR (60/40 SPLIT) or SEAT REPLACEMENT - REAR (50/50 SPLIT 2ND REAR .
  3. Remove the front center seat. Refer to SEAT REPLACEMENT - CENTER .
  4. Remove the floor center console, if equipped. Refer to CONSOLE REPLACEMENT (BASE CONSOLE) or CONSOLE REPLACEMENT (LUXURY CONSOLE) .
  5. Remove the lower bracket from the I/P to the floor to allow carpet removal.
  6. Remove the door sill trim plates. Refer to Door Sill Plate Replacement - Front  and to Door Sill Plate Replacement - Rear  .
  7. Remove the hinge pillar trim panels from both sides. Refer to Trim Panel Replacement - Hinge Pillar  .
  8. Remove the garnish molding center pillar trim. Refer to Garnish Molding Replacement - Center Pillar  .
  9. Lower the midgate.
    10. Fig 1: Removing Carpet (Avalanche/Escalade EXT)
    GM625225Courtesy of GENERAL MOTORS CORP.
  10. Remove the third pillar trim. Refer to Trim Replacement - Third Pillar (Tahoe/Yukon/Escalade/Suburban)  or Trim Replacement - Third Pillar (Avalanche/Escalade EXT)  .
  11. Remove the carpet from the vehicle.
scientia non olet · About LEMON Manuals