LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

  1. Remove the Instrument Panel (IP) cluster trim plate bezel. Refer to Bezel Replacement - IP Cluster .
  2. Remove the screws that retain the IP cluster to the IP assembly.
    3. Fig 1: Locating IP Cluster Retaining Screws
    G01697257Courtesy of GENERAL MOTORS CORP.
  3. Remove the IP cluster from the vehicle by tilting the bottom of the cluster outward.
  4. Disconnect the IP cluster harness from the IP cluster.
    5. Fig 2: Disconnecting IP Cluster Harness
    G01697258Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals