LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Instrument Cluster Lamp Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (IP) cluster. Refer to Instrument Panel Cluster (IPC) Replacement .
  2. Unclip the IP cluster rear cover plate by prying gently on the tabs with a screwdriver.
    3. Fig 1: Locating Rear Cover Plate Tabs
    G01697261Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear cover plate from the IP cluster.
    4. Fig 2: Removing Rear Cover Plate
    G01697262Courtesy of GENERAL MOTORS CORP.
  4. Remove the bulb and base assembly by turning the bulb 1/2 turn counter clockwise and pulling outward.
  5. Remove the bulb from the base by pulling outward.
    6. Fig 3: Locating Cluster Lamp Bulb For Removal
    G01697263Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals