Removal Procedure

Remove the Instrument Panel (IP) cluster trim bezel. Refer to Bezel Replacement - IP Cluster .
Remove the following components, depending on how equipped:
- The IP cupholder cover, shown.
- The IP cupholder. Refer to Cupholder Replacement .
- The floor console extension. Refer to Console Replacement (Base Console) or Console Replacement (Luxury Console) .

Fig 1: Removing Lower IP Trim Panel

Courtesy of GENERAL MOTORS CORP.

Fig 2: Locating Lower Trim Panel Retaining Bolts

Courtesy of GENERAL MOTORS CORP.

Disconnect the following electrical connectors:
- The power outlet ports (1, 2).
- The ashtray lamp (3).
- The IP compartment lamp, if equipped.
Remove the lower trim panel from the IP assembly.

Fig 3: Locating Electrical Connectors For Removal

Courtesy of GENERAL MOTORS CORP.