LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Console Replacement (Luxury Console) >> Removal Procedure

Removal Procedure

  1. Remove both front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET .
  2. Remove the console bezel. Refer to Bezel Replacement - Floor Console (Luxury) .
  3. Remove the two bolts (1) attaching the floor console to the front extension.
  4. Remove the bolt (2) attaching the floor console to the subwoofer box, if equipped.
  5. Lift up the console assembly from the floor studs and move rearwards to gain access to the wire harness connector.
    6. Fig 1: Locating Floor Console Retaining Bolts
    G01697331Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the wire connector.
  7. Remove the console assembly (3) from the vehicle.
scientia non olet · About LEMON Manuals