LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> Bezel Replacement - IP Cluster >> Removal Procedure

Removal Procedure

  1. Apply the parking brake to prevent the vehicle from moving.
  2. If equipped with an automatic transmission, move the shift lever all the way down to last gear.
  3. Tilt the steering wheel to the full down position.
  4. Pull gently rearward on the corners of the bezel from the Instrument Panel (IP) assembly.
  5. Remove the bezel.
    6. Fig 1: Removal of Bezel from IP Cluster
    G01697241Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals