LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement - Rocker Panel (Z-71) >> Removal Procedure

Removal Procedure

    Fig 1: Rocker Panel Molding (Z-71)
    GM597773Courtesy of GENERAL MOTORS CORP.
  1. Remove the 10 push-pins.
  2. Slide the molding upward in order to disengage the molding.
  3. Remove the molding from the vehicle.
scientia non olet · About LEMON Manuals