LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Denali >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement - Hood Front >> Removal Procedure

Removal Procedure

  1. Open the hood.
    2. Fig 1: Removing Hood Front Molding
    GM717726Courtesy of GENERAL MOTORS CORP.
  2. Compress the retaining clips from the inside edge of the hood while pulling on the molding.
  3. Remove the hood molding.
scientia non olet · About LEMON Manuals